FORTIGATE 60 FIREWALL CLI CONFIGURATION

Configure Interface
Fortiget-60 # config system interface
edit internal
set ip 192.168.2.1 255.255.255.0
set mode static
next
edit wan1
set ip 192.168.3.1 255.255.255.0
next
edit internal
set ip 192.168.100.1 255.255.255.0
set dhcp-server-mode none (Set DHCP Server Mode Off)
next
edit wan1
set ip 192.168.1.2 255.255.255.0
show system interface (Check interface configuration)
Configure DNS
Fortiget-60 # config system dns
set primary 165.21.83.88
set secondary 165.21.100.88
end
Configure Internal Allowaccess (ping, https)
Fortiget-60 # config system interface
edit internal
unset allowaccess
set allowaccess ping
set allowaccess https
end
Configure Wan1 Allowaccess (ping)
Fortiget-60 # config system interface
edit wan1
unset allowaccess
set allowaccess ping
end
Configure Static Route
Fortiget-60 # config router static
edit 1
set device wan1
set dst 0.0.0.0 0.0.0.0
set gateway 192.168.1.1
set distance 10
Change Admin Password
Fortiget-60 # config system admin
edit admin
set password
end
Firmware Upgrade
To upgrade the FortiGate firmware from the CLI:
1 Make sure that the TFTP server is running.
2 Copy the new firmware image file to the root directory of your TFTP server.
3 Log into the CLI as the admin administrative user.
Fortiget-60 # execute restore image